Ø  Core

l M0+ core with multiplier, frequency up to 72MHz

l  MR operation acceleration unit: division, square root, arctangent, coordinate transformation, SVPWM, PID, etc.      

Ø  Memory    

l  128K/64K Flash，8K SRAM   

l  Built-in 96-bit UID, UserID, hardware CRC      

Ø  Operating Characteristics

l  Operating voltage：2.0-5.5V   

l  Operating temperature：-40~105℃      

l  Low power consumption: SLEEP mode and IDLE mode   

Ø  EMS 

        l  ESD

                    n  HBM：JS-001-2023 Class 3A

                    n  MM：JEDEC EIA/JESD22-A115 Class C

                    n  CDM：ANSI/ESDA/JEDEC JS-002-2022 Class C3

       l  EFT

                    n  EN61000-4-4 Level 4

Ø  Analog

l  18-channel 2.5Msps high-speed ADC, supports      dual-sampling mode, built-in temperature sensor

l  3 rail-to-rail operational amplifiers, supporting      differential and PGA modes

l  4 analog comparators with built-in virtual center point

l  One 10-bit DAC

l  Reference voltage: 2.4V/2.048V/1.024V, VDD

Ø  Digital

l  8-channel advanced EPWM, supporting four complementary output  with dead time and multi-level fault protection

l  One 24-bit PCAP timer, supporting 3 capture inputs

l  2 16-bit QEP counters

l  4 general timers, 1 BTM timer, 1 watchdog timer

l  One independent CAN interface, supporting CAN specification 2.0B and CAN FD

l 3 independent UART interfaces, with UART2 supporting  full LIN functionality

l  2 SPI interfaces

l  2 IIC interfaces